Browse by Department

Article

Xia, Y. and Xu, X.S. and Niu, Y.L. and Liu, L. (2018) 'Neoproterozoic amalgamation between Yangtze and Cathaysia blocks : the magmatism in various tectonic settings and continent-arc-continent collision.', Precambrian research., 309 . pp. 56-87.

Williams, S. R. and Wu, J. J. and Unsworth, A. and Khan, I. (2009) 'Tribological and surface analysis of 38mm alumina–as-cast Co–Cr–Mo total hip arthroplasties.', Proceedings of the Institution of Mechanical Engineers, part H : journal of engineering in medicine., 223 (8). pp. 941-954.

Scholes, S. C. and Unsworth, A. and Jones, E. (2007) 'Polyurethane unicondylar knee prostheses : simulator wear tests and lubrication studies.', Physics in medicine and biology., 52 (1). pp. 197-212.

Buckley, C. P. and Wu, J. J. and Haughie, D. W. (2006) 'The integrity of welded interfaces in ultra high molecular weight polyethylene : part 1 model.', Biomaterials., 27 (17). pp. 3178-3186.

Scholes, S. C. and Burgess, I. C. and Marsden, H. R. and Unsworth, A. and Jones, E. and Smith, N. (2006) 'Compliant layer acetabular cups : friction testing of a range of materials and designs for a new generation of prosthesis which mimics the natural joint.', Proceedings of the I MECH E part H : journal of engineering in medicine., 220 (5). pp. 583-596.

Vassilou, K. and Elfick, A. P. D. and Scholes, S. C. and Unsworth, A. (2006) 'The effect of 'running-in' on the tribology and surface morphology of metal-on-metal Birmingham hip resurfacing device in simulator studies.', Proceedings of the I MECH E part H : journal of engineering in medicine., 220 (2). 269 - 277.

Scholes, S. C. and Unsworth, A. and Blamey, J. M. and Burgess, I. C. and Jones, E. and Smith, N. (2005) 'Design aspects of compliant, soft layer bearings for an experimental hip prosthesis.', Proceedings of the I MECH E part H : journal of engineering in medicine., 219 (2). pp. 79-87.

Wu, J. J. and Buckley, C. P. (2004) 'Plastic deformation of glassy polystyrene : a unified model of yield and the role of chain length.', Journal of polymer science part B : polymer physics., 42 (11). pp. 2027-2040.

Vassiliou, K. and Unsworth, A. (2004) 'Is the wear factor in total joint replacements dependent on the nominal contact stress in ultra-high molecular weight polyethylene contacts?', Proceedings of the I MECH E part H : journal of engineering in medicine., 218 (2). pp. 101-107.

Elfick, A. P. D. and Green, S. M. and Krikler, S. and Unsworth, A. (2003) 'The nature and dissemination of UHMWPE wear debris retrieved from periprosthetic tissue of THR.', Journal of biomedical materials research part A., 65A (1). pp. 95-108.

Liu, C. and Green, S. M. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2003) 'A preliminary hip joint simulator study of the migration of a cemented femoral stem.', Proceedings of the I MECH E part H : journal of engineering in medicine., 217 (2). pp. 127-135.

Boampong, D. K. and Green, S. M. and Unsworth, A. (2003) 'N+ ion implantation of Ti6Al4V alloy and UHMWPE for total joint replacement application.', Journal of applied biomaterials and biomechanics., 1 . pp. 164-171.

Liu, C. and Green, S. M. and Watkins, N. D. and Gregg, P. J. and McCaskie, A. W. (2002) 'Creep behavior comparison of CMW1 and palacos R-40 clinical bone cements.', Journal of materials science : materials in medicine., 13 (11). pp. 1021-1028.

Wu, J. J. and Buckley, C. P. and O'Connor, J. J. (2002) 'Mechanical integrity of compression-moulded ultra-high molecular weight polyethylene : effects of varying process conditions.', Biomaterials., 23 (17). pp. 3773-3783.

Wu, J. J. and Buckley, C. P. and O'Connor, J. J. (2002) 'Processing of ultra-high molecular weight polyethylene : modelling the decay of fusion defects.', Chemical engineering research and design : official journal of the European federation of chemical engineering : part A., 80 (A5). pp. 423-431.

Elfick, A. P. D. and Smith, S. L. and Green, S. M. and Unsworth, A. (2001) 'The quantitative assessment of UHMWPE wear debris produced in hip simulator testing : the influence of head material and roughness, motion and loading.', Wear : an international journal on the science and technology of friction, lubrication and wear., 249 (5-6). pp. 517-527.

Wu, J. J. and Buckley, C.P. and O'Connor., J. J (2001) 'The origin of fusion defects in ultra-high molecular weight polyethylene for joint replacement prostheses.', Journal of materials science letters., 20 (5). pp. 473-475.

Book chapter

Scholes, S. C. and Smith, S. L. and Ash, H. and Unsworth, A. (2002) 'The lubrication and friction of conventional UHMWPE novel compliant layer and hard bearing surfaces for use in total hip prostheses.', in Friction, lubrication and wear of artificial joints. , pp. 59-74.

List was generated at Thu Nov 28 12:54:31 2024 GMT.